<acronym id="a2sgq"></acronym>
<acronym id="a2sgq"><center id="a2sgq"></center></acronym><acronym id="a2sgq"><center id="a2sgq"></center></acronym>
<acronym id="a2sgq"></acronym><rt id="a2sgq"></rt>
<acronym id="a2sgq"><small id="a2sgq"></small></acronym>
<acronym id="a2sgq"><small id="a2sgq"></small></acronym>
<acronym id="a2sgq"><small id="a2sgq"></small></acronym>

Sawing and Drying

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Second Log I've Cut with my Bandsawmill

rod hays

Here's a video of the second log I've cut up. I had to do a little adjustment at the beginning, and now it's working beyond my expectations. A little bit more practice and I'll be running it a lot more efficiently.

2/25/14       #2: Second Log I've Cut with my Bandsaw ...
Dave Boyt  Member

Website: http://www.norwoodsawmills.com

Very nice, consistent cutting. I've always been skeptical about using tires for bandwheels, but you've shown how well it works. I kept waiting for you to cut into the clamp. Guess I'll have to wait a little longer.

2/25/14       #3: Second Log I've Cut with my Bandsaw ...
Rod Hays

I wasn't sure if using those big 27'' tires would work. Those wheels are 50 pounds each. I figure the weight of those heavy wheels would give inertia for cutting,which I believe it has.The video shows the blade cutting the wood like hot knife through butter. Also what I like about using tires is I don't need to have water running on the blade to cut.

3/3/14       #4: Second Log I've Cut with my Bandsaw ...
Rod Hays

Went up into the woods Sunday and cut down a popular along the side of the road that was in the way, and not a very good tree. Here is a video of one of the logs from that tree on the mill. It was about 36'' wide at the widest part of the log.

3/3/14       #5: Second Log I've Cut with my Bandsaw ...
Rod Hays

Here is a video of what the curved boards look like off that popular log from the video above.

3/5/14       #6: Second Log I've Cut with my Bandsaw ...
Mark B Member

The only thing that jumps out to me, and Im not sure Im seeng clearly in the video, is it looks like your bunks may be very light and I would fear over time they are just not going to hold up. But again, may be seeing incorrectly in the video.

In my experience rolling logs on a mill over time is absolutely brutal. Members twice as robust as you would normally think will be bent and distorted in just a short time of sawing.

Nice though all in all. Likely a very rewarding project.

The task at hand now is working on the "sawyer" part. Learning to read your logs, cut tension out of a log, and get the best possible boards you can out of each log because home built mill or not, if you apply $5/hour to your time, these will be some of the most expensive boards you will ever lay your hands on. So better make sure they are as nice as possible.

When you see board springing off the cant as your sawing them you know they are going to get worse each minute that passes.

3/5/14       #7: Second Log I've Cut with my Bandsaw ...
Dave Boyt  Member

Website: http://www.norwoodsawmills.com

I go along with beefing up the cross members, maybe using square tubing. The main thing I see is that the cut appears to be smooth and straight. You sawed it exactly the way I would have, which is the curve flat on the track, and leaving both edges natural. I looks like that piece might have been from a branch-- or from a very crooked tree. Either way, it would have a lot of stress. When you get cutting straight logs, you'll be amazed at how much more satisfied you'll be with the mill. Those slabs have good potential for a counter top, bench, or table.

3/7/14       #8: Second Log I've Cut with my Bandsaw ...
Rod Hays

I agree the cross members are a little weak,but they were what was laying around so I used them. I'll more then likely replace them with something stronger. Someone wanted to see a better video of how I built the bandsaw mill,so I hope this video helps. If not I'll make another one on what I didn't explain in this one very well.

3/7/14       #9: Second Log I've Cut with my Bandsaw ...
Rod Hays

I made a video of cutting up the oak log. I'm stating to get use to the sawmill and the problems I might run into. Haven't cut any metal with the saw blade yet.

3/7/14       #10: Second Log I've Cut with my Bandsaw ...
Rod Hays

Made a sawdust deflector and it seems to have helped. I made this video cutting the other part of the tree limb with the sawdust deflector.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:

    Date of your Birth:

    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)

  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)