<video id="75bvl"><noframes id="75bvl">
<listing id="75bvl"><thead id="75bvl"><listing id="75bvl"></listing></thead></listing>
<listing id="75bvl"></listing>
<listing id="75bvl"><cite id="75bvl"></cite></listing>
<var id="75bvl"><ruby id="75bvl"><th id="75bvl"></th></ruby></var><th id="75bvl"><th id="75bvl"></th></th><noframes id="75bvl">
<listing id="75bvl"></listing>
<span id="75bvl"><strike id="75bvl"><dl id="75bvl"></dl></strike></span>



Calculating footage based on weight

      How to estimate the board feet in logs based on their weight. August 10, 2000

Does anybody have an easy way of determining board footage (BF) based on the weight of the logs in, say, red oak?

All log rules vary; there is no hard-and-fast rule for determining footage from weight. Some rules (Doyle) are very conservative, others (Int'l., 1/4-inch) are pretty liberal.

As rules of thumb go, this is one of the handiest I've come across, but it is far from precise:
1000 board feet of lumber;
1 cord of pulpwood;
1 unit of chips or sawdust;
all contain about the same amount of wood, approximately 5,000 lbs.

There is an excellent book that has lots of tables: U.S. Department of Agriculture Handbook No. 605, Utilization of Hardwoods Growing on Southern Pine Sites. It is available at all libraries through Interlibrary Loan.

One formula given is Int'l. 1/4-inch volume: BF equals 0.09230 (weight of the load of logs in pounds), minus 9.19587 (number of pieces on the load, times 2, if under 20 feet long), plus 420.158

A cord of Appalachian oak weighs 5,760 pounds. A thousand BF of green red oak (1-1/8 inches thick and 2 inches of overlength weighs 5,860 pounds.
Gene Wengert, forum moderator

Here are some numbers that I have experienced:

One semi load of logs weighing approx. 40,000 to 44,000 pounds will average about 3,500 BF (Doyle scale). These diameters are typically between 18 and 24 inches. The smaller the average diameter, the less the footage per pound.

Another way to get a reasonable estimate is to calculate your average diameter (including bark, and an allowance for taper); determine your cubic feet per foot of log; and use 65 or 70 pounds for your weight per cubic foot. Finally, divide by your footage per lineal foot of log, either scaled or actual.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Primary Processing: Yield Formulas

  • KnowledgeBase: Knowledge Base

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2021 - Woodweb.com
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review Woodweb.com's Copyright Policy.

    The editors, writers, and staff at Woodweb.com try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at Woodweb.com after considerate evaluation, and at their own risk.

    865 Troxel Road
    Lansdale, PA 19446

    Contact Us

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article