<video id="75bvl"><noframes id="75bvl">
<listing id="75bvl"><thead id="75bvl"><listing id="75bvl"></listing></thead></listing>
<listing id="75bvl"></listing>
<listing id="75bvl"><cite id="75bvl"></cite></listing>
<var id="75bvl"><ruby id="75bvl"><th id="75bvl"></th></ruby></var><th id="75bvl"><th id="75bvl"></th></th><noframes id="75bvl">
<listing id="75bvl"></listing>
<span id="75bvl"><strike id="75bvl"><dl id="75bvl"></dl></strike></span>



Electrostatics and Finishing

      The role electrostatics play when used in a finishing environment

Q. Could you send me info on how electrostatic works with spraying for woodworking?
Areas of interest:

  1. How does electrostatic work with wood?

  2. Types of functions?

  3. Types of finishes?

  4. Types of equipment? Text, specs, and pictures

  5. Shop needs?

  6. Costs?

  7. Markets?

A. Rick Hill responds The use of electrostatics on wood has been around for awhile. As a general overview, most industrial finishers use electrostatics when they are coating parts that are hard to spray evenly. Common applications would be cribs or bed ends where an electrostatic can coat the dowels evenly without the usual overspray seen on sprayed applications.

The wood is the negative pole so the coating carries the positive charge.

The drawbacks are that you are dealing with a very flammable combination of products...solvent based coatings, wood and electricity. Very specialized equipment and specific coatings are needed before this is a feasible method to use. It is also a system that requires excellent operator training and consistency to stay safe.

As to cost, once the equipment is set up, they are similar to other coatings, but the equipment cost is the biggest investment hurdle.

Rick Hill is an independent representative and consultant for industrial wood finishes. He has been involved in the woodworking industry for 12 years, and has been known to actually hold, shoot, and clean a spray gun.

Comment. Michael Michalski responds:
I am sorry to tell you this but the information provided in the answer to the question is incorrect. Having worked for several manufacturers and distributors of electrostatic spraying equipment, I thought you might need some help with this subject.

First, the wood is not a negative pole. Electrostatics create the negative pole or charge which is picked up by the paint particles. The substrate, in this case wood, must be positively grounded. Some woods can contain enough moisture content to allow them to be positively grounded, but most do not. There are several methods for achieving a positive ground on the wood. One method is to fog the wood with a saline solution to create a conductive surface on the wood. Some manufacturers will use a conductive sensatizer in their stain which again forms a conductive surface on the wood. The wood can then be positively grounded. The negatively charged particles are then attracted to the positively grounded part.

Second, both manual and automatic guns are intrinsically safe. They incorporate current limiting technology that can sense the proximity of a grounded object and instantly reduce voltage to prevent ignition of the substrate. What few fires that have occurred in the last forty years of use are insignificant when compared to the numbers of guns in use. Most of these can be attributed to improper use of the equipment or insufficient maintenance of the equipment and the grounding process.

Third, electrostatic paint formulations do not usually contain solvents with low flash points thus further increasing the safety of these systems. Fourth, water base paints are also commonly used in many electrostatic wood finishing systems. The issue of operator training and maintenance is true but the payback on material savings and labor is usually substantial and more than pays for both the initial costs and maintenance costs. If I can be of further assistance to you, please feel free to contact me.

Mike Michalski
Advanced Finishing Technologies Inc.
I am a manufacturers representative for spraying equipment with over 25 years of finishing equipment expertise and am a consultant for finishing equipment systems and processes, environmental compliance and operator training instruction.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Finishing: General Wood Finishing

  • KnowledgeBase: Finishing: High Speed Production

  • KnowledgeBase: Finishing: Refinishing

  • KnowledgeBase: Knowledge Base

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2021 - Woodweb.com
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review Woodweb.com's Copyright Policy.

    The editors, writers, and staff at Woodweb.com try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at Woodweb.com after considerate evaluation, and at their own risk.

    865 Troxel Road
    Lansdale, PA 19446

    Contact Us

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article