<video id="75bvl"><noframes id="75bvl">
<listing id="75bvl"><thead id="75bvl"><listing id="75bvl"></listing></thead></listing>
<listing id="75bvl"></listing>
<listing id="75bvl"><cite id="75bvl"></cite></listing>
<var id="75bvl"><ruby id="75bvl"><th id="75bvl"></th></ruby></var><th id="75bvl"><th id="75bvl"></th></th><noframes id="75bvl">
<listing id="75bvl"></listing>
<span id="75bvl"><strike id="75bvl"><dl id="75bvl"></dl></strike></span>

Formulas for estimating log yield

Formulas for calculating the board footage of lumber that can be obtained from logs. January 4, 2001

Question
I'm looking for a chart that will help me estimate the board feet of lumber that can be obtained from logs of different sizes.

Forum Responses
There are probably over 100 log rules that estimate footage in logs. Most of them are empirical. However, a few are formula-based. Some have regression equations. For example, Scribner is
V = (0.0494 x Dia x Dia x Length) - (0.124 x Dia x Length) - (0.269 x Length).

International is
V = 0.905 x ([0.22 x Dia x Dia] - [0.71 x Dia])
for every 4 foot length of log. There is also a longer equation for any length log.

Doyle is
V = [L x (Dia - 4) x (Dia - 4)] / 16

Doyle is also
V = [0.0625 x Dia x Dia x Length] - [0.500 x Dia x Length] + [1.000 x length]

In all cases, diameter is inside bark, small end. It is rounded to the closest inch. (Sometimes the scale includes the outside bark diameter.) Length is the last full foot--no fractions. Often the footage is rounded to the closest 10 BF. Then, since all the numbers are a multiple of 10, the "0" is dropped (e.g., 120 BF becomes 12) and the scale is called "decimal" which means you have to multiply by 10. But sometimes the decimal values do not drop to "10" and then you do not have to multiply by 10.

无限在线观看免费看视频