Getting a charge from melamine
How to mitigate the creation and transmission of static electricity during the handling thermofused melamine. April 2, 2002
Yesterday I bought a unit of 3/4 thermofused melamine by American Laminates (not my normal brand). Today I started cutting it up into cabinet components. I was shocked by the amount of static electricity generated by handling these panels. Every time I touch a metal object, zap, and some of these jolts are pretty intense. Has anyone run across this?
I experienced a similar situation, and had the opportunity to discuss it with the factory rep. Although my experience is with a different product type, and I haven't tried the solution yet, here is what he suggested. Use a piece of metal pull chain, like the little ball type you find on the pull switch lights, and lay it on the unit, with one end grounded. The theory being that the metal chain will provide a path to ground for the static. As you slide each sheet off, you are creating even more static, but hopefully the chain will continue to dissipate the accumulating charge, and the chain will slide off the sheet you are pulling and onto the top of the next sheet. He suggested hanging it overhead so I didn't have to worry about tripping on it.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Dust Collection, Safety, Plant Management
KnowledgeBase: Dust Collection, Safety, Plant Management: General
KnowledgeBase: Dust Collection, Safety, Plant Management: Material Handling
KnowledgeBase: Lumber and Plywood
KnowledgeBase: Lumber & Plywood: Storage
KnowledgeBase: Knowledge Base
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review Woodweb.com's Copyright Policy.
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.
865 Troxel Road
Lansdale, PA 19446
Copyright © 1996-2021 - Woodweb.com