Hardware for a Flip-Down Door
What you need are "flap stays." November 29, 2014
Question (WOODWEB Member) :
Is it enough to hinge a very wide door (42 wide x 12" tall) with only Blum clips on the hinges? Would the door fly down if I used the soft close/self-close or does that matter? I guess if I used the 110 degree the door would stop there, but wouldn’t the hinges be wanting to pull out of there cup holes? Would I not want to use at least four hinges?
From contributor D:
Two hinges should be ok but you need a flap stay.
From contributor B:
Blum makes what they call the Aventos. They are like a garage door lift that will not slam shut and will stay up .We used it over a fridge and it worked fine. Check the rating of the unit to match the size door you are using and get the correct one.
From the original questioner:
I would need the Aventos HK to be upside down and I already checked with Blum. They only work in their normal rotation.
From contributor D:
All you need are two "Duo" flap stays from Hafele. They ate inexpensive and work great for a flap door front. Two stays and your two hinges.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Cabinetmaking: Cabinet Door Construction
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review Woodweb.com's Copyright Policy.
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.
865 Troxel Road
Lansdale, PA 19446
Copyright © 1996-2021 - Woodweb.com