<video id="75bvl"><noframes id="75bvl">
<listing id="75bvl"><thead id="75bvl"><listing id="75bvl"></listing></thead></listing>
<listing id="75bvl"></listing>
<listing id="75bvl"><cite id="75bvl"></cite></listing>
<var id="75bvl"><ruby id="75bvl"><th id="75bvl"></th></ruby></var><th id="75bvl"><th id="75bvl"></th></th><noframes id="75bvl">
<listing id="75bvl"></listing>
<span id="75bvl"><strike id="75bvl"><dl id="75bvl"></dl></strike></span>



Modifying a Table Saw for Better Dust Collection

      Ideas for rigging a hose fitting and a funnel to the base of a table saw for effective capture of sawdust. April 19, 2011

I've got an older Powermatic 12" table saw, and whenever I use it with dust collection I need to get down on the floor and hook the 4" flex hose up to a hokey PVC fitting which is just stuffed into the outlet hole in the cabinet (pic 1).

Is there a better fitting I could use? Haven't gotten around yet to doing a permanent setup. Running separate hoses to all my machines because I move some of them around a lot.

Also (pic 2), what do you do to seal up the big opening on the side? Now I use a cardboard cutout I made, which fits around the motor. Does a fair job of sealing that opening, but I'm wondering if there's a better way.

Click here for higher quality, full size image

Click here for higher quality, full size image

Forum Responses
(Dust Collection Forum)
From contributor J:
You can buy a welded flange that can be screwed to the cabinet so that the hose slips over it. Is that the sort of thing you're looking for? I know Oneida sells such things. Looking at those pictures, I think I'd also build a square plywood funnel/hopper sort of thing in the bottom of that cabinet so that the dust falls naturally towards the outlet rather than piling up in the corners. With such a small flex hose, you'll never get any dust collector to evacuate the dust otherwise.

From contributor E:
Get a toilet floor flange. Attach to your dc hose. Pipe side of the flange. Use 3/4" ply (ply makes it easy to attach/adjust screws), cut 4" hole to align with saw cabinet hole. Secure ply to saw. Attach flange with 2 screws. Use the slots and you can now twist the hose on and off. Adjust the screws to hold the flange snug. You will not have to keep adjusting the flange screws once you set it up. Like contributor J said. Add a funnel inside. I've added a scrap of laminate inside. Helps a lot.

From the original questioner:
Oh, that's some good advice, especially about the toilet flange. I'll go check one out! I'll look at that Oneida site also. Really need to complete my dust collection setup. Good advice about making a funnel too. Really appreciate the advice!

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Knowledge Base

  • KnowledgeBase: Dust Collection, Safety, Plant Management

  • KnowledgeBase: Dust Collection, Safety, Plant Management: General

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2021 - Woodweb.com
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review Woodweb.com's Copyright Policy.

    The editors, writers, and staff at Woodweb.com try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at Woodweb.com after considerate evaluation, and at their own risk.

    865 Troxel Road
    Lansdale, PA 19446

    Contact Us

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article