<video id="75bvl"><noframes id="75bvl">
<listing id="75bvl"><thead id="75bvl"><listing id="75bvl"></listing></thead></listing>
<listing id="75bvl"></listing>
<listing id="75bvl"><cite id="75bvl"></cite></listing>
<var id="75bvl"><ruby id="75bvl"><th id="75bvl"></th></ruby></var><th id="75bvl"><th id="75bvl"></th></th><noframes id="75bvl">
<listing id="75bvl"></listing>
<span id="75bvl"><strike id="75bvl"><dl id="75bvl"></dl></strike></span>



Outside Dust Collector Details

      Professional advice, including fire safety and noise control details, for a dust collector built onto a shop's exterior. November 25, 2005

I am planning to locate my new dust collector (about a 2 hp model) outside my shop in an attached shed to save room inside my small space. I want to insulate the shed for noise so the neighbors don't get too offended. Any suggestions on how to do that? What requirements will I have to vent the shed for airflow? How can I muffle the air opening?

Forum Responses
(Dust Collection and Safety Equipment Forum)
From Curt Corum, forum technical advisor:
It is a good idea to locate your collector in an enclosure on an outside wall of the shop. As you have indicated, a couple of benefits are that you will save floor space, and most of the noise will be contained in the enclosure.

One important factor is that you cut in a filter frame near the ceiling, on the common wall between the enclosure and the shop. Try to achieve at least two square feet of area. Insert a couple of furnace filters in the opening. This will allow air to re-circulate back into the shop. The furnace filters are inexpensive to change and will provide for cleaner air returning to the shop. If you vent to the outside, I would use a fixed louver with screen, at least two square feet of area.

As far as sound attenuation, many have used carpet foam. It is not as costly as acoustical foam and it is porous enough to absorb sound. One important factor is the foam must be flame retardant. Many suppliers offer flame retardant carpet foam as well as flame retardant carpet. When we exhibit at trade shows today, we must use flame retardant carpet as well as the foam padding. The only other spot we can attenuate is if you are using a 2 stage collector, you can install a muffler/silencer between the cyclone outlet and after filter. Fine dust will be traveling through the silencer, so periodically you should vacuum it out. The silencer will require a larger shed. They are normally about 3 feet in length.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Knowledge Base

  • KnowledgeBase: Dust Collection, Safety, Plant Management

  • KnowledgeBase: Dust Collection, Safety, Plant Management: General

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2021 - Woodweb.com
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review Woodweb.com's Copyright Policy.

    The editors, writers, and staff at Woodweb.com try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at Woodweb.com after considerate evaluation, and at their own risk.

    865 Troxel Road
    Lansdale, PA 19446

    Contact Us

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article