Using Ozone to Counteract Off-Gassing Odor
An ozone generator with enough capacity to make a dent in finish off-gassing odor would create indoor pollution concerns, says the voice of experience. December 23, 2014
Has anyone tried using an ozone generator to combat odors from overnight off-gassing? Do you have any other tricks to minimize this?
From contributor M:
I've used a lot of ozone generators for other purposes (deodorizing homes, apartments, etc.). Any ozone generator that makes enough ozone to fight off organic vapors is also going to be enough ozone to be dangerous, or at the very least, give you a nasty headache. If you haven't run an ozone generator before, trust me, it turns the whole area into the odor of a massive chlorine bomb (it behaves the same way as chlorine). My suggestion is that you get an exhaust fan mounted in your shop that you can put on a timer, or just leave running overnight. If you put it on a timer, kick it on a few hours before you come in each morning. If you have a ridge vent, be sure to leave it open for good inflow of clean air.
From the original questioner:
The manufacturer of this machine states that the timer should be set to shut it off one hour before the building will be occupied. Apparently within an hour all of the ozone will convert to oxygen and dissipate. Nowhere did it say that it could be used for finishing odors so I wasn't sure if it would be safe. A finisher friend of mine told me that in the past he had some sort of device that removed the odors overnight but couldn't remember what it was called. Researching on the internet this was the only thing I could come up with that may be what he had. I am trying to find some way to keep the smell minimal to keep peace with my neighbors.
From contributor M:
Activated carbon will definitely remove it, but that will get expensive quickly. I can also assure you (nicely) that the amount of ozone needed to remove the vapor odors from an overnight batch of doors (say, 10-50 doors) will take way longer than an hour to dissipate. We had apartments that we did this to that took half a day to off-gas with the windows and doors left open. Perhaps I'm more sensitive to it than most folks, but it was pretty harsh.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Dust Collection, Safety, Plant Management
KnowledgeBase: Dust Collection, Safety, Plant Management: General
KnowledgeBase: Finishing: General Wood Finishing
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review Woodweb.com's Copyright Policy.
The editors, writers, and staff at Woodweb.com try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at Woodweb.com after considerate evaluation,
and at their own risk.
865 Troxel Road
Lansdale, PA 19446
Copyright © 1996-2021 - Woodweb.com